Unpainted pewter Half-Orc Spellblade miniature, 32mm tall, another view

Half-Orc Spellblade

$11.99
Skip to product information
Unpainted pewter Half-Orc Spellblade miniature, 32mm tall, another view
  • Unpainted pewter Half-Orc Spellblade miniature, 32mm tall, another view
  • Primed pewter Half-Orc Spellblade miniature, 32mm tall
  • Unpainted pewter Half-Orc Spellblade miniature, 32mm tall
  • Unpainted pewter Half-Orc Spellblade miniature, 32mm tall, another view
  • Primed pewter Half-Orc Spellblade miniature, 32mm tall, another view
  • Unpainted pewter Half-Orc Spellblade miniature, 32mm tall, another view
  • Primed pewter Half-Orc Spellblade miniature, 32mm tall
  • Unpainted pewter Half-Orc Spellblade miniature, 32mm tall
  • Unpainted pewter Half-Orc Spellblade miniature, 32mm tall, another view
  • Primed pewter Half-Orc Spellblade miniature, 32mm tall, another view
Half-Orc Spellblade

Half-Orc Spellblade

$11.99
Height
32mm
Ancestry
Half-Orc
Plays as
Spellblade, Fighter

His pocket watch runs backward on moonless nights. He never paid for it, either.

Lead-free pewter · 25mm base included · Ships unpainted

In stock
  • Free US shipping at $25+
  • Usually ships next business day
  • Made in the USA

Size check

About a d20 and a half tall.
Also plays
Sword Mage, Swashbuckler, Thief, Striker, Assassin, Dual Wielding
Base
25mm, included
Gear and look
Dual wielding swords, Saber, Short cutlass, Shoulder pauldrons, Duster, Pocket watch with chain
Armor
Cloth
Cast in
Lead-free pewter
Ships
Unpainted and unassembled
SKU
SH0213

Finish your base

A pinch of static grass and a spare base or two, and it'll look table-ready.

What's in the box
  • One lead-free pewter figure, unpainted and unassembled
  • A 25mm slotted plastic base

The painted photos are for inspiration. Yours shows up bare, and the paint job's all yours.
Assembly tips
  • File or scrape off any flash, the thin bits left over from casting.
  • If the tab sits loose in the base slot, bend it into a shallow V so it wedges in, then add a drop of superglue.
  • Fill any gaps with putty or basing sand before you prime.
Shipping and returns

Free US shipping on orders of $25 or more. Most orders ship the next business day.

The fine print lives on the shipping and returns and refunds pages. Stuck? Email service@stonehavenmini.com.
Safety

Choking hazard: small parts. Intended for users older than 14.

Tiny swords, tinier shields. Keep them away from little kids and curious pets. More on the choking hazard page.

A 32mm half-orc spellblade cast in lead-free pewter, lunging forward with a short cutlass thrust out in one hand and a long curved saber held low in the other, in a duster with shoulder pauldrons and a pocket watch on a chain.

  • Height: 32mm to the top of the figure
  • Base: 25mm slotted plastic base included
  • Equipped with: Dual wielding swords, saber, short cutlass, shoulder pauldrons, duster, and pocket watch with chain
  • Plays as: Spellblade, Fighter, Sword Mage, Swashbuckler, Thief, Striker, Assassin, Dual Wielding
  • Material: Lead-free pewter, cast in the USA
  • Ships: Unpainted and unassembled. A little filing may be needed to clean up flash.
  • Safety: Choking hazard: small parts. Intended for users older than 14.

Base tip: if the tab's loose in the slot, bend it into a shallow V and add a dot of superglue. A little putty fills any gap.

Overheard at the Howling Hog

The clockmaker says the watch on that chain runs backward on moonless nights, and he'd know, since it's his watch and the half-orc never paid for it. He wants it back. Whoever gets it will find out what it's counting down to. By his reckoning, there's about a week left.

Use it as

  • A half-orc spellblade or swashbuckler PC who fights with two blades
  • A duelist who's always exactly on time, and always for a reason
  • An assassin working down a list by the hour

DM tip

Give his watch a countdown. Tell the players it reads twelve, take one tick off each session, and decide what happens at zero before they do.

Name ideas

Rhask Swiftlunge, Mortimer Ticktock, Onyx Two-Edge

Print it as an NPC tent card Free, one page: cut it out, fold it and stand it on the table.

Add the crew

These 3 turn up in the same story. All in stock.

All 4 for $51.96, or $41.60 as a party of 4.

More like this