Unpainted pewter Kitsune Fighter miniature, 47mm tall

Kitsune Fighter

$16.99
Skip to product information
Unpainted pewter Kitsune Fighter miniature, 47mm tall
  • Unpainted pewter Kitsune Fighter miniature, 47mm tall
  • Unpainted pewter Kitsune Fighter miniature, 47mm tall, another view
  • Primed pewter Kitsune Fighter miniature, 47mm tall
  • Primed pewter Kitsune Fighter miniature, 47mm tall, another view
  • Unpainted pewter Kitsune Fighter miniature, 47mm tall
  • Unpainted pewter Kitsune Fighter miniature, 47mm tall, another view
  • Primed pewter Kitsune Fighter miniature, 47mm tall
  • Primed pewter Kitsune Fighter miniature, 47mm tall, another view
Kitsune Fighter

Kitsune Fighter

$16.99
Height
47mm
Ancestry
Kitsune
Plays as
Fighter, Warrior

Carries his blade straight up, everywhere. The cellar door's next.

Lead-free pewter · 25mm base included · Ships unpainted

In stock
  • Free US shipping at $25+
  • Usually ships next business day
  • Made in the USA

Size check

About two d20s tall.
Also plays
Berserker, Spellblade
Eye height
25mm
Base
25mm, included
Gear and look
Leather armor, A naginata/two-handed sword
Armor
Cloth
Cast in
Lead-free pewter
Ships
Unpainted and unassembled
SKU
SH0311

Finish your base

A pinch of static grass and a spare base or two, and it'll look table-ready.

What's in the box
  • One lead-free pewter figure, unpainted and unassembled
  • A 25mm slotted plastic base

The painted photos are for inspiration. Yours shows up bare, and the paint job's all yours.
Assembly tips
  • File or scrape off any flash, the thin bits left over from casting.
  • If the tab sits loose in the base slot, bend it into a shallow V so it wedges in, then add a drop of superglue.
  • Fill any gaps with putty or basing sand before you prime.
Shipping and returns

Free US shipping on orders of $25 or more. Most orders ship the next business day.

The fine print lives on the shipping and returns and refunds pages. Stuck? Email service@stonehavenmini.com.
Safety

Choking hazard: small parts. Intended for users older than 14.

Tiny swords, tinier shields. Keep them away from little kids and curious pets. More on the choking hazard page.

A 47mm male kitsune fighter cast in lead-free pewter, caught mid-run and leaning forward with a long, curved two-handed sword held straight up. He wears leather armor, with a bushy fox tail swept out behind.

  • Height: 47mm to the top of the figure (eyes at 25mm)
  • Base: 25mm slotted plastic base included
  • Equipped with: Leather armor and a Naginata/two-handed sword
  • Plays as: Fighter, Warrior, Berserker, Spellblade
  • Material: Lead-free pewter, cast in the USA
  • Ships: Unpainted and unassembled. A little filing may be needed to clean up flash.
  • Safety: Choking hazard: small parts. Intended for users older than 14.

Base tip: if the tab's loose in the slot, bend it into a shallow V and add a dot of superglue. A little putty fills any gap.

Overheard at the Howling Hog

Three to one says the fox can't get through the cellar door without lowering that blade. He runs everywhere hunched forward with it held upright before his face, and he's already taken the sign off the bakery and the pennant off the mill. Bets close at sundown. The cellar door's been reinforced.

Use it as

  • A kitsune fighter or spellblade PC with a very long sword
  • A wandering sword master the party can hire as a gate guard
  • A berserker fox who charges the party's front line blade first

DM tip

Make low doorways and tunnels matter for him. Whenever he fights indoors, roll a d6, and on a 1 that long blade sticks in a beam.

Name ideas

Ruskin Highblade, Thane Copperbrush, Old Lopetail

Print it as an NPC tent card Free, one page: cut it out, fold it and stand it on the table.

Add the crew

These 3 turn up in the same story. All in stock.

All 4 for $48.96, or $39.20 as a party of 4.

More like this