{"title":"Cloth","description":"Cloth is a designation given to adventuring clothing that offers little to no inherent physical protection. That's not to say that the Witches' dress or the conjurer's cape can't have an enchantment that protects the wearer from getting stabbed though! Cloth-based apparel is also usually lighter and more comfortable than leather or metal armor, so it appeals to the lazier classes like Wizards and Mages.","products":[{"product_id":"sh0171","title":"Halfling Potion Maker","description":"\u003cul\u003e\n\u003cli\u003ePewThis 21mm tall female Halfling Potion Maker has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Witch, Mage, Chemist, fortune teller, doctor, Alchemist, Shaman. This Halfling Potion Maker is equipped with pouches, potions, animal tusk, and light robes.\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis 21mm tall female Halfling Potion Maker has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Witch, Mage, Chemist, fortune teller, doctor, Alchemist, Shaman. This Halfling Potion Maker is equipped with pouches, potions, animal tusk, and light robes. 20mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter.\u003c\/p\u003e\n\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default Title","offer_id":32827911995476,"sku":"SH0171","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/xcwpd7xyxx9771zxw624.jpg?v=1601507720"},{"product_id":"sh0174","title":"Halfling Rat Catcher, 30mm","description":"\u003cul\u003e\n\u003cli\u003eThis 30mm tall male Halfling Rat Catcher has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Rogue, thief, vagrant, merchant, food vendor, civilian, urban druid. This Halfling Rat Catcher is equipped with living Rats, Dead Rats, Pole, dagger, traps, cages, peg leg, button down vest and hat .\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 30mm tall male Halfling Rat Catcher has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Rogue, thief, vagrant, merchant, food vendor, civilian, urban druid. This Halfling Rat Catcher is equipped with living Rats, Dead Rats, Pole, dagger, traps, cages, peg leg, button down vest and hat . 20mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827913011284,"sku":"SH0174","price":11.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/IMG_4026_0754.png?v=1634836783"},{"product_id":"sh0175","title":"Halfling Rogue, 19mm","description":"\u003cul\u003e\n\u003cli\u003eThis 19mm tall female Halfling Rogue has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Rogue, Fighter, Thief, Slayer, Avenger, Beast master. This Halfling Rogue is equipped with a dagger, and a hooded cloak.\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 19mm tall female Halfling Rogue has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Rogue, Fighter, Thief, Slayer, Avenger, Beast master. This Halfling Rogue is equipped with a dagger, and a hooded cloak. 20mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827913109588,"sku":"SH0175","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/IMG_4040_0768_1.png?v=1634836860"},{"product_id":"sh0176","title":"Halfling Scholar, 20mm","description":"\u003cul\u003e\n\u003cli\u003eThis 20mm tall male Halfling Scholar has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Librarian, Professor, Wizard, Mage, Lore keeper. This Halfling Scholar is equipped with books, scrolls, and a satchel.\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 20mm tall male Halfling Scholar has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Librarian, Professor, Wizard, Mage, Lore keeper. This Halfling Scholar is equipped with books, scrolls, and a satchel. 20mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827913994324,"sku":"SH0176","price":11.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/ip12o5lxsjxbpv5gelbs.png?v=1637595020"},{"product_id":"sh0177","title":"Halfling Sergeant, 20mm","description":"\u003cul\u003e\n\u003cli\u003eThis 20mm tall male Halfling Sergeant has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Sergeant, Warrior, General, Warlord, Fighter, Rogue, Leader. This Halfling Sergeant is equipped with a crossbow, quiver full of bolts, chest guard, badge, duster, and has a demanding pointing finger and demanding look on his face!\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 20mm tall male Halfling Sergeant has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Sergeant, Warrior, General, Warlord, Fighter, Rogue, Leader. This Halfling Sergeant is equipped with a crossbow, quiver full of bolts, chest guard, badge, duster, and has a demanding pointing finger and demanding look on his face! 20mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827914813524,"sku":"SH0177","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/ajg4xdvrccqkn1p17x0w.png?v=1637595022"},{"product_id":"sh0190","title":"Halfling Witch, 29mm","description":"\u003cul\u003e\n\u003cli\u003eThis 29mm tall female Halfling Witch has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Witch, Mage, Chemist, Fortune teller, Doctor, Alchemist, Shaman. This Halfling Witch is equipped with a broom, voodoo dolls, and a dress .\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 29mm tall female Halfling Witch has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Witch, Mage, Chemist, Fortune teller, Doctor, Alchemist, Shaman. This Halfling Witch is equipped with a broom, voodoo dolls, and a dress . 20mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827922612308,"sku":"SH0190","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/Painted_Miniature_0069.png?v=1634837036"},{"product_id":"sh0191","title":"Halfling Wizard, 21mm","description":"\u003cul\u003e\n\u003cli\u003eThis 21mm tall male Halfling Wizard has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Mage, Wizard, Sorcerer, Warlock, Mystic. This Halfling Wizard is equipped with wizard's robes, pouch, wizard hat, long beard, and magical spells coming from his hands .\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003cli\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. \n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 21mm tall male Halfling Wizard has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Mage, Wizard, Sorcerer, Warlock, Mystic. This Halfling Wizard is equipped with wizard's robes, pouch, wizard hat, long beard, and magical spells coming from his hands . 20mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827922907220,"sku":"SH0191","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/mbz13t0in5dyprukw0e2.jpg?v=1601507866"},{"product_id":"sh0223","title":"Hengeyokai Messenger, 13mm","description":"\u003cul\u003e\n\u003cli\u003eThis 13mm tall male Hengeyokai Messenger has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Birdman, Noble, hireling, Min\/maxing dodge ratings. This Hengeyokai Messenger is equipped with a scroll, robe, and platform sandals .\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 13mm tall male Hengeyokai Messenger has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Birdman, Noble, hireling, Min\/maxing dodge ratings. This Hengeyokai Messenger is equipped with a scroll, robe, and platform sandals . 20mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827949121620,"sku":"SH0223","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/jxbezqldeghtm88oeset.jpg?v=1601508144"},{"product_id":"sh0224","title":"Hengeyokai Songbird, 9mm","description":"\u003cul\u003e\n\u003cli\u003eThis 9mm tall female Hengeyokai Songbird has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Bard, Noble, Maid, Mage, Musician, Min\/maxing dodge ratings. This Hengeyokai Songbird is equipped with a bonnet, dress, stringed instrument .\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 9mm tall female Hengeyokai Songbird has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Bard, Noble, Maid, Mage, Musician, Min\/maxing dodge ratings. This Hengeyokai Songbird is equipped with a bonnet, dress, stringed instrument . 20mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827949482068,"sku":"SH0224","price":7.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/irq6ivmvl22xsboyrvpf.jpg?v=1601508152"},{"product_id":"sh0226","title":"Kitsune Assassin, 28mm","description":"\u003cul\u003e\n\u003cli\u003eThis 28mm tall Kitsune Assassin has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Hunter, Fighter, Assassin, Warrior, Rouge, Thief, Spy. This Kitsune is equipped with a cloth armor, Shin guards, Bracers Bushy fox tail, and Dual claws.\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eThe pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003cli\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. \n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 28mm tall Kitsune Assassin has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Hunter, Fighter, Assassin, Warrior, Rouge, Thief, Spy. This Kitsune is equipped with a cloth armor, Shin guards, Bracers Bushy fox tail, and Dual claws. 25mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. Miniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827951546452,"sku":"SH0226","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/rqxhtnymyikjzpetb0xl.png?v=1637595049"},{"product_id":"sh0227","title":"Kitsune Swordsman, 32mm","description":"\u003cul\u003e\n\u003cli\u003eThis 32mm tall male Kitsune Swordsman has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Fighter, Investigator, Shifter, Samurai, Soldier, Warrior. This Kitsune Swordsman is equipped with katana, cape ,light armor, and large belt buckle.\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003cli\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. \n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 32mm tall male Kitsune Swordsman has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Fighter, Investigator, Shifter, Samurai, Soldier, Warrior. This Kitsune Swordsman is equipped with katana, cape ,light armor, and large belt buckle. 20mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827952595028,"sku":"SH0227","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/oxiqhswofp5qst7yjt2a.jpg?v=1601508179"},{"product_id":"sh0228","title":"Kobold Mage Lord, 32mm","description":"\u003cul\u003e\n\u003cli\u003eThis 32mm tall male Kobold Mage lord has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Sorcerer, Wizard, Warlock, Summoner, Arcanist, Mage, Magic User, Evoker, Caster, Dragonwrought. This Kobold Mage lord is equipped with belt with pouches, dragon claw feet, bracelets, stream of fire from hand to hand, Skull amulet, and bat wings( Bat wings come unattached and will need to attached by hobby glue).\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003cli\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. \n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 32mm tall male Kobold Mage lord has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Sorcerer, Wizard, Warlock, Summoner, Arcanist, Mage, Magic User, Evoker, Caster, Dragonwrought. This Kobold Mage lord is equipped with belt with pouches, dragon claw feet, bracelets, stream of fire from hand to hand, Skull amulet, and bat wings( Bat wings come unattached and will need to attached by hobby glue). This figure comes in 2 parts. 25mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827953905748,"sku":"SH0228","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/u6w8gca5fgexufmdnhmc.png?v=1637595052"},{"product_id":"sh0236","title":"Pixie Mage, 22mm","description":"\u003cul\u003e\n\u003cli\u003eThis 22mm tall female Pixie Mage has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Fairy, Pixie, Mage, Wizard, Caster. This Pixie Mage is equipped with a tall boots, wand, and wings.\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 22mm tall female Pixie Mage has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Fairy, Pixie, Mage, Wizard, Caster. This Pixie Mage is equipped with a tall boots, wand, and wings. 20mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827959148628,"sku":"SH0236","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/aboyjqytu2yooymqeqeq.jpg?v=1601508264"},{"product_id":"sh0237","title":"Pixie Thief, 17mm","description":"\u003cul\u003e\n\u003cli\u003eThis 17mm tall male Pixie Thief has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Fairy, Pixie, Thief, Rogue, Spell blade. This Pixie Thief is equipped with daggers, light armor, and wings.\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 17mm tall male Pixie Thief has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Fairy, Pixie, Thief, Rogue, Spell blade. This Pixie Thief is equipped with daggers, light armor, and wings. 20mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827959279700,"sku":"SH0237","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/kmptuzqdb9yiyfsqsx44.jpg?v=1601508272"},{"product_id":"sh0238","title":"Pixie Wizard, 15mm","description":"\u003cul\u003e\n\u003cli\u003eThis 15mm tall male Pixie Wizard has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Fairy, Pixie, Mage, Wizard, Caster. This Pixie Wizard is equipped with a robe, wizard hat, wand, and a set of wings.\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 15mm tall male Pixie Wizard has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Fairy, Pixie, Mage, Wizard, Caster. This Pixie Wizard is equipped with a robe, wizard hat, wand, and a set of wings. 20mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827960131668,"sku":"SH0238","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/qvnm2hzmbe16pciegd9k.jpg?v=1601508281"},{"product_id":"sh0243","title":"Shrouded Figure on Bat Mount, 30mm","description":"\u003cul\u003e\n\u003cli\u003eThis 30mm tall male Shrouded Figure on Bat Mount has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Wraith, Wizard, Nemesis, Warlock, Sorcerer, Mage, Druid, Demon, Flying Mount. Equipped with giant bat mount , shrouded figure (included but separate from plastic base and bat) sword, and hooded cloak\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003cli\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. \n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 30mm tall male Shrouded Figure on Bat Mount has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Wraith, Wizard, Nemesis, Warlock, Sorcerer, Mage, Druid, Demon, Flying Mount. This Shrouded Figure on Bat Mount is equipped with giant bat mount , shrouded figure (included but separate from plastic base and bat) sword, and hooded cloak. 25mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827963768916,"sku":"SH0243","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/zdn5qzwvaiboz3rjfglt.png?v=1637595064"},{"product_id":"sh0245","title":"Tengu Assassin, 33mm","description":"\u003cul\u003e\n\u003cli\u003eThis 33mm tall male Tengu Assassin has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Kenku, Shrike, Avian, warrior, Assassin, . This Tengu Assassin is equipped with robes, and chain linked pick axes.\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 33mm tall male Tengu Assassin has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Kenku, Shrike, Avian, warrior, Assassin, . This Tengu Assassin is equipped with robes, and chain linked pick axes. 25mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827964522580,"sku":"SH0245","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/nehdlwo5xt19sntkzjsi.png?v=1637595068"},{"product_id":"sh0246","title":"Tengu Mage, 25mm","description":"\u003cul\u003e\n\u003cli\u003eThis 25mm tall male Tengu Mage has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Kenku, Shrike, Avian, Wizard, Mage. This Tengu Mage is equipped with a orb, staff with gem, pointy mage hat, fur coat, and platform sandals .\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 25mm tall male Tengu Mage has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Kenku, Shrike, Avian, Wizard, Mage. This Tengu Mage is equipped with a orb, staff with gem, pointy mage hat, fur coat, and platform sandals . 20mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827966128212,"sku":"SH0246","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/rzisaq1gdqzxmcjel3ur.png?v=1637595070"},{"product_id":"sh0250r","title":"Troll Mage, 78mm","description":"\u003cul\u003e\n\u003cli\u003eThis 78mm tall (66mm from the feet to the eyes) Troll Mage has a great amount of detail for Dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a mage, wizard, druid, forest guardian, elemental, god. This Troll Mage is equipped with cloth armor, staff.\u003c\/li\u003e\n\u003cli\u003eCobblestone 65mm Scenic Base included. Miniature is cast in Urethane Resin.\u003c\/li\u003e\n\u003cli\u003eThe pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003cli\u003eThe high quality miniatures are made of 100% Urethane Resin, and come unassembled and unpainted. Some filing may be needed to clean up excess flashing, or sprue. \n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 78mm tall (66mm from the feet to the eyes) Troll Mage has a great amount of detail for Dungeon-crawling, RPGs and table top war games. Miniature could be used as a mage, wizard, druid, forest guardian, elemental, god. This Troll Mage is equipped with cloth armor, staff. Cobblestone 65mm Scenic Base included. Miniature is cast in Urethane Resin. The pictures of the painted miniatures are for inspiration and are only examples. Miniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. \u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":31167836553300,"sku":"SH0250R","price":20.89,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/mc1ki9epd3zzhhffliyr.jpg?v=1601510024"},{"product_id":"sh0252r","title":"Old Troll, 65mm","description":"\u003cul\u003e\n\u003cli\u003eThis 65mm tall (59mm from the feet to the eyes) Old Troll has a great amount of detail for Dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a warrior, fighter, barbarian, troll, giant, hill giant, ogre, monster, BBGE. This Old Troll is equipped with loincloth, club, fur wraps.\u003c\/li\u003e\n\u003cli\u003eCobblestone 65mm Scenic Base included. Miniature is cast in Urethane Resin.\u003c\/li\u003e\n\u003cli\u003eThe pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003cli\u003eThe high quality miniatures are made of 100% Urethane Resin, and come unassembled and unpainted. Some filing may be needed to clean up excess flashing, or sprue. \n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 65mm tall (59mm from the feet to the eyes) Old Troll has a great amount of detail for Dungeon-crawling, RPGs and table top war games. Miniature could be used as a warrior, fighter, barbarian, troll, giant, hill giant, ogre, monster, BBGE. This Old Troll is equipped with loincloth, club, fur wraps. Cobblestone 65mm Scenic Base included. Miniature is cast in Urethane Resin. The pictures of the painted miniatures are for inspiration and are only examples. Miniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. \u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":31167836487764,"sku":"SH0252R","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/bkvzfwjgarnjorcieelj.jpg?v=1601510006"},{"product_id":"sh0011","title":"Dwarf Blacksmith, 25mm","description":"\u003cul\u003e\n\u003cli\u003eThis 25mm tall Dwarf Female Blacksmith has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Fighter, Warrior, Artificer, Craftsman, Civilian, or Shopkeeper. This dwarf is equipped with blacksmith hammer, tongs, anvil, apron braided hair.\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eThe pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003cli\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. \n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 25mm tall Dwarf Female Blacksmith has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a fighter, warrior, Artificer, craftsman, civilian, shopkeeper. This dwarf is equipped with blacksmith hammer, tongs, anvil, apron braided hair. Anvil comes loose and not attached to figure assembly required. 25 mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. Miniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827707129940,"sku":"SH0011","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/czblzdzifvai0malnv87.png?v=1637594873"},{"product_id":"sh0013","title":"Dwarf Brewmaster, 23mm","description":"\u003cul\u003e\n\u003cli\u003eThis 23mm tall male Dwarf Brewmaster has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Monk, Barkeeper, Potion Maker, Brawler, Drunkard, Warrior. This Dwarf Brewmaster is equipped with Wooden Keg with tap, studded paddle, stein, mug of Ale , bracers, full bread .\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003cli\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. \n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 23mm tall male Dwarf Brew master has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Monk, Barkeeper, Potion Maker, Brawler, Drunkard, Warrior. This Dwarf Brew master is equipped with Wooden Keg with tap, studded paddle, stein, mug of Ale , bracers, full bread . 25mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come un assembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827708309588,"sku":"SH0013","price":11.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/ktuw9iphgiifmahy0198.png?v=1637594875"},{"product_id":"sh0014","title":"Dwarf Cleric, 23mm","description":"\u003cul\u003e\n\u003cli\u003eThis 23mm tall male Dwarf Cleric has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Wizard, Priest, Senior Bureaucrat, Vizier, Warlock, Senator. This Dwarf Cleric is equipped with a leather ball club, and clerical robes.\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003cli\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. \n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 23mm tall male Dwarf Cleric has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Wizard, Priest, Senior Bureaucrat, Vizier, Warlock, Senator. This Dwarf Cleric is equipped with a leather ball club, and clerical robes. 25mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827709390932,"sku":"SH0014","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/qp2q7dteueggcnkoehqy.png?v=1637594880"},{"product_id":"sh0019","title":"Dwarf Highwayman, 21mm","description":"\u003cul\u003e\n\u003cli\u003eThis 21mm tall male Dwarf Highwayman has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Robber, Thief, Rogue, Gunslinger, Swashbuckler, Assassin, Spellslinger. This Dwarf Highwayman is equipped with a blunderbuss, sword, pirate boots, goggles, face shroud and hat .\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003cli\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. \n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 21mm tall male Dwarf Highwayman has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Robber, Thief, Rogue, Gunslinger, Swashbuckler, Assassin, Spellslinger. This Dwarf Highwayman is equipped with a blunderbuss, sword, pirate boots, goggles, face shroud and hat . 25mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827714469972,"sku":"SH0019","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/q70rv4r0jlx5vwus58j8.png?v=1637594888"},{"product_id":"sh0021","title":"Dwarf Mage, 25mm","description":"\u003cul\u003e\n\u003cli\u003eThis 25mm tall female Dwarf Mage has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Sorcerer, Wizard, Warlock, Summoner, Arcanist, Mage, Magic User, Evoker. This Dwarf Mage is equipped with ornate Staff, mage robes, bracelets, and mage head wraps .\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003cli\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. \n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 25mm tall female Dwarf Mage has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Sorcerer, Wizard, Warlock, Summoner, Arcanist, Mage, Magic User, Evoker. This Dwarf Mage is equipped with ornate Staff, mage robes, bracelets, and mage head wraps . 25mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827716632660,"sku":"SH0021","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/jkbwxyjoxsczleyoxibe.png?v=1637594894"},{"product_id":"sh0024","title":"Dwarf Monk, 25mm","description":"\u003cul\u003e\n\u003cli\u003eThis 25mm tall male Dwarf Monk has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Monk, Fighter, Brawler, Ninja, Kung fu Master, Mystic, Priest . This Dwarf Monk is equipped with ancient knowledge scroll, fist with arm wrappings, straw hat, and platform sandals.\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003cli\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. \n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 25mm tall male Dwarf Monk has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Monk, Fighter, Brawler, Ninja, Kung fu Master, Mystic, Priest . This Dwarf Monk is equipped with ancient knowledge scroll, fist with arm wrappings, straw hat, and platform sandals. 25mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827720106068,"sku":"SH0024","price":11.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/sepr9zhntejonf9ismoo.png?v=1637594896"},{"product_id":"sh0029","title":"Dwarf Witch, 21mm","description":"\u003cul\u003e\n\u003cli\u003eThis 21mm tall female Dwarf Witch has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Cook, Wizard, Mage, sorcerer, caster, warlock,Shaman, Oracle. This Dwarf Witch is equipped with a cleaver, skull necklace, cloth clothing and creepy vibes.\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003cli\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. \n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 21mm tall female Dwarf Witch has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Cook, Wizard, Mage, sorcerer, caster, warlock,Shaman, Oracle. This Dwarf Witch is equipped with a cleaver, skull necklace, cloth clothing and creepy vibes. 25mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827727052884,"sku":"SH0029","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/b5cunwbqwhu7gx2dkrl2.jpg?v=1601506620"},{"product_id":"sh0034","title":"Elf Bard, 35mm","description":"\u003cul\u003e\n\u003cli\u003eThis 35mm tall male Elf Bard has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Musician, Troubadour, Herald, Song-slinger. This Elf Bard is equipped with a lute, daggers, jacket and packed full of emotional baggage.\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003cli\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. \n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 35mm tall male Elf Bard has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Musician, Troubadour, Herald, Song-slinger. This Elf Bard is equipped with a lute, daggers, jacket and packed full of emotional baggage. 25mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827730395220,"sku":"SH0034","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/r25jhwskakwvrvsjajku.png?v=1637594905"},{"product_id":"sh0037","title":"Elf Cleric, 35mm","description":"\u003cul\u003e\n\u003cli\u003eThis 35mm tall male Elf Cleric has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Priest, Mage, Wizard, Cleric, Warpriest. This Elf Cleric is equipped with an orbed relic, pouch, and a hooded robe.\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003cli\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. \n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 35mm tall male Elf Cleric has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Priest, Mage, Wizard, Cleric, Warpriest. This Elf Cleric is equipped with an orbed relic, pouch, and a hooded robe. 25mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827733278804,"sku":"SH0037","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/m9eecb9vlmtvk1vnlpxr.png?v=1637594907"},{"product_id":"sh0040","title":"Elf Druid, 45mm","description":"\u003cul\u003e\n\u003cli\u003eThis 45mm tall male Elf Druid has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Druid, Shaman, Future Ent. This Elf Druid is equipped with a large dagger, single large antler ( The other one was lost in battle) , tree-arm.\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003cli\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. \n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 45mm tall male Elf Druid has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Druid, Shaman, Future Ent. This Elf Druid is equipped with a large dagger, single large antler ( The other one was lost in battle) , tree-arm. 25mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827736653908,"sku":"SH0040","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/ox0aumljzucfwx3ljgc5.jpg?v=1601506652"},{"product_id":"sh0042","title":"Elf Fortune Teller, 39mm","description":"\u003cul\u003e\n\u003cli\u003eThis 39mm tall female Elf Fortune Teller has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Mystic, Mage, Gypsy, Wizard, Civilian, Witch, Sorceress . This Elf Fortune Teller is equipped with glass orb, hand full of tarot cards, long dress with ornate shroud, gem head band, and multiple necklaces .\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003cli\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. \n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 39mm tall female Elf Fortune Teller has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Mystic, Mage, Gypsy, Wizard, Civilian, Witch, Sorceress . This Elf Fortune Teller is equipped with glass orb, hand full of tarot cards, long dress with ornate shroud, gem head band, and multiple necklaces . 25mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827738423380,"sku":"SH0042","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/pvgqtikuoevg7sad2g8y.png?v=1637594908"},{"product_id":"sh0047","title":"Elf Illusionist, 31mm","description":"\u003cul\u003e\n\u003cli\u003eThis 31mm tall male Elf Illusionist has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Illusionist, Wizard, Warlock, Mystic, Cleric, Wiseman, Civilian . This Elf Illusionist is equipped with cane, majestic coat, and a goatee.\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003cli\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. \n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 31mm tall male Elf Illusionist has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Illusionist, Wizard, Warlock, Mystic, Cleric, Wiseman, Civilian . This Elf Illusionist is equipped with cane, majestic coat, and a goatee. 25mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827743797332,"sku":"SH0047","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/gl1thjg2viohzcijfoxy.jpg?v=1601506668"},{"product_id":"sh0049","title":"Elf Librarian, 36mm","description":"\u003cul\u003e\n\u003cli\u003eThis 36mm tall female Elf Librarian has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Scholar, Investigator, Pathfinder, Lore master, Map Maker. This Elf Librarian is equipped with books, scrolls, knowledge, spectacles, pig tails, and sandals.\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003cli\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. \n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 36mm tall female Elf Librarian has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Scholar, Investigator, Pathfinder, Lore master, Map Maker. This Elf Librarian is equipped with books, scrolls, knowledge, spectacles, pig tails, and sandals. 25mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827749138516,"sku":"SH0049","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/dvmewgj1liof4uq2lj8f.png?v=1637594910"},{"product_id":"sh0051","title":"Elf Mage, 31mm","description":"\u003cul\u003e\n\u003cli\u003eThis 31mm tall female Elf Mage has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Mage, Wizard, Sorceress, Druid, Witch, Mystic, Warlock. This Elf Mage is equipped with light cloth Armor lined with jewels, long staff, tiara with long hair with a few braids. .\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003cli\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. \n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 31mm tall female Elf Mage has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Mage, Wizard, Sorceress, Druid, Witch, Mystic, Warlock. This Elf Mage is equipped with light cloth Armor lined with jewels, long staff, tiara with long hair with a few braids. . 25mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827823685716,"sku":"SH0051","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/vwa8z0sst8mln29vqfzv.png?v=1637594912"},{"product_id":"sh0052","title":"Elf Monk, 35mm","description":"\u003cul\u003e\n\u003cli\u003eThis 35mm tall male Elf Monk has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Monk, Martial Arts Expert, Sage. This Elf Monk is equipped with spirit beads, arm and leg wrappings .\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003cli\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. \n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 35mm tall male Elf Monk has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Monk, Martial Arts Expert, Sage. This Elf Monk is equipped with spirit beads, arm and leg wrappings . 25mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827824472148,"sku":"SH0052","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/wxwl8qlqsohmooqoz39e.png?v=1637594914"},{"product_id":"sh0054","title":"Elf Patriarch, 34mm","description":"\u003cul\u003e\n\u003cli\u003eThis 34mm tall male Elf Patriarch has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Priest, Pastor, Monk, Mystic, Cleric, Wiseman, Civilian. This Elf Patriarch is equipped with long robes, cloak cape with shoulder protectors, and a large ledger .\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003cli\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. \n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 34mm tall male Elf Patriarch has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Priest, Pastor, Monk, Mystic, Cleric, Wiseman, Civilian. This Elf Patriarch is equipped with long robes, cloak cape with shoulder protectors, and a large ledger . 25mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default Title","offer_id":32827826733140,"sku":"SH0054","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/peuupra6klbss4dmdrq7.jpg?v=1601506712"},{"product_id":"sh0055","title":"Elf Pilot, 32mm","description":"\u003cul\u003e\n\u003cli\u003eThis 32mm tall female Elf Pilot has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Pathfinder, Investigator, Steampunk, Swashbuckler, Gunslinger. This Elf Pilot is equipped with a blackjack, pistol, flare gun, and pilot's goggles.\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003cli\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. \n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 32mm tall female Elf Pilot has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Pathfinder, Investigator, Steampunk, Swashbuckler, Gunslinger. This Elf Pilot is equipped with a blackjack, pistol, flare gun, and pilot's goggles. 25mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827827388500,"sku":"SH0055","price":11.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/o7ue3fxftunzkf194ui1.jpg?v=1601506722"},{"product_id":"sh0056","title":"Elf Pilot Mounted, 60mm","description":"\u003cul\u003e\n\u003cli\u003eThis 60mm tall male Elf Pilot Mounted has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Pathfinder, Investigator, Steampunk, Swashbuckler, Gunslinger, Pilot. This Elf Pilot Mounted is equipped with a blackjack, pistol, flare gun, goggles, and Heron mount. (Heron and figure come unattached and will need to attached by hobby glue). This figure comes in 3 parts, pilot legs, pilot torso, heron. Elf is in a sitting position\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 60mm tall male Elf Pilot Mounted has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Pathfinder, Investigator, Steampunk, Swashbuckler, Gunslinger, Pilot. This Elf Pilot Mounted is equipped with a blackjack, pistol, flare gun, goggles, and Heron mount. (Heron and figure come unattached and will need to attached by hobby glue). This figure comes in 3 parts, Pilot legs, Pilot torso , heron. Elf is in a sitting position . 25mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827828469844,"sku":"SH0056","price":18.49,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/m6igra6abglgds2aayli.jpg?v=1601506726"},{"product_id":"sh0061","title":"Elf Sniper, 23mm","description":"\u003cul\u003e\n\u003cli\u003eThis 23mm tall male Elf Sniper has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Sniper, Ratling, Ranged Dps, Sharp Shooter. This Elf Sniper is equipped with a rifle with shoulder strap, and cloth armor .\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003cli\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. \n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 23mm tall male Elf Sniper has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Sniper, Ratling, Ranged Dps, Sharp Shooter. This Elf Sniper is equipped with a rifle with shoulder strap, and cloth armor . 25mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827833516116,"sku":"SH0061","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/josk9ydp71kti1vq27ez.jpg?v=1601506775"},{"product_id":"sh0080","title":"Gnome Archer, 25mm","description":"\u003cul\u003e\n\u003cli\u003eThis 25mm tall Gnome Archer has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Ranger, Hunter, Thief, Bowman, Rouge. This Gnome is equipped with a cloth armor, Drawn bow with single Arrow, Full Quiver of Arrows, and a sheathed scimitar.\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eThe pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003cli\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. \n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 25mm tall Gnome Archer has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Ranger, Hunter, Thief, Bowman, Rouge. This Gnome is equipped with a cloth armor, Drawn bow with single Arrow, Full Quiver of Arrows, and a sheathed scimitar. 19mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. Miniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827844198484,"sku":"SH0080","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/vq0qxmtc02to8amajss0.png?v=1637594938"},{"product_id":"sh0081","title":"Gnome Aristocrat, 26mm","description":"\u003cul\u003e\n\u003cli\u003eThis 26mm tall female Gnome Aristocrat has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Lady, Noblewoman, Queen, Princess, Thief in disguise. This Gnome Aristocrat is equipped with a fancy dress, Fan, dagger, powdered wig, and flower cap with feathers. .\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 26mm tall female Gnome Aristocrat has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Lady, Noblewoman, Queen, Princess, Thief in disguise. This Gnome Aristocrat is equipped with a fancy dress, Fan, dagger, powdered wig, and flower cap with feathers. . 20mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827845115988,"sku":"SH0081","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/kxawxzrlsy0spvqtxuet.jpg?v=1601506963"},{"product_id":"sh0082","title":"Gnome Artificer, 25mm","description":"\u003cul\u003e\n\u003cli\u003eThis 25mm tall female Gnome Artificer has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Mechanic, Craftsman, Fighter, Mech Driver, steampunk, Investigator, Swashbuckler, Treasure hunter. This Gnome Artificer is equipped with a blunderbuss, mace, satchel, goggles.\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 25mm tall female Gnome Artificer has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Mechanic, Craftsman, Fighter, Mech Driver, steampunk, Investigator, Swashbuckler, Treasure hunter. This Gnome Artificer is equipped with a blunderbuss, mace, satchel, goggles. 20mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827845476436,"sku":"SH0082","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/ujbqfdfsesf5av6owdjx.png?v=1637594942"},{"product_id":"sh0085","title":"Gnome Bard, 23mm","description":"\u003cul\u003e\n\u003cli\u003eThis 23mm tall female Gnome Bard has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Bard, Musician, Minstrel, Harpist, Singer, Bar Maid. This Gnome Bard is equipped with a harp, sword, Minstrel's garb.\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 23mm tall female Gnome Bard has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Bard, Musician, Minstrel, Harpist, Singer, Bar Maid. This Gnome Bard is equipped with a harp, sword, Minstrel's garb. 20mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":42114692874467,"sku":"SH0085","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/ndbefxuqxtmetecadkxx.png?v=1637594946"},{"product_id":"sh0089","title":"Gnome Cleric, 19mm","description":"\u003cul\u003e\n\u003cli\u003eThis 19mm tall Gnome Female Cleric has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Wizard, Mage, Priest, Druid, Warlock, Caster or Healer. This gnome is equipped with a long staff, Elf Ears, Clerical Robes, and Braided Hair.\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eThe pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003cli\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. \n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 19 mm tall Gnome Female Cleric has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Wizard, Mage, Priest, Druid, Warlock, Caster or Healer. This gnome is equipped with a long staff, Elf Ears, Clerical Robes, and Braided Hair. 19mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. Miniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":42114693529827,"sku":"SH0089","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/r4gsppsrtku1jfuf2y3p.png?v=1637594950"},{"product_id":"sh0096","title":"Gnome Illusionist, 23mm","description":"\u003cul\u003e\n\u003cli\u003eThis 23mm tall male Gnome Illusionist has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Mage, Wizard, Caster, Sorcerer, Warlock. This Gnome Illusionist is equipped with mages robes, wand and ready to cast magical spells and charm.\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 23mm tall male Gnome Illusionist has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Mage, Wizard, Caster, Sorcerer, Warlock. This Gnome Illusionist is equipped with mages robes, wand and ready to cast magical spells and charm. 20mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827859042388,"sku":"SH0096","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/zquncqveootetpqeuqgp.jpg?v=1601507100"},{"product_id":"sh0099","title":"Gnome Long Gunner Female, 22mm","description":"\u003cul\u003e\n\u003cli\u003eThis 22mm tall female Gnome Long Gunner Female has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Sniper, Ratling, Ranged Dps, Sharp Shooter, Hunter. This Gnome Long Gunner Female is equipped with a scoped rifle, cloak, ammo pouch and light armor.\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 22mm tall female Gnome Long Gunner Female has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Sniper, Ratling, Ranged Dps, Sharp Shooter, Hunter. This Gnome Long Gunner Female is equipped with a scoped rifle, cloak, ammo pouch and light armor. 20mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827860942932,"sku":"SH0099","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/bglbgmmnk5oj5tqpaosy.png?v=1637594968"},{"product_id":"sh0100","title":"Gnome Long Gunner Male, 20mm","description":"\u003cul\u003e\n\u003cli\u003eThis 20mm tall male Gnome Long Gunner Male has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Sniper, Ratling, Ranged Dps, Sharp Shooter, Hunter. This Gnome Long Gunner Male is equipped with a scooped rifle, light armor, cloak and top hat.\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 20mm tall male Gnome Long Gunner Male has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Sniper, Ratling, Ranged Dps, Sharp Shooter, Hunter. This Gnome Long Gunner Male is equipped with a scooped rifle, light armor, cloak and top hat. 20mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827861893204,"sku":"SH0100","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/jvthudzrpe1ds0dfqp6p.png?v=1637594970"},{"product_id":"sh0101","title":"Gnome Mad Scientist, 20mm","description":"\u003cul\u003e\n\u003cli\u003eThis 20mm tall male Gnome Mad Scientist has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Inventor, Mechanic, Alchemist, Tinkerer, Artificer, Potion Maker, Steampunk. This Gnome Mad Scientist is equipped with a harpoon gun, prosthetic, mechanical leg, goggles, and ready to use potions.\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 20mm tall male Gnome Mad Scientist has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Inventor, Mechanic, Alchemist, Tinkerer, Artificer, Potion Maker, Steampunk. This Gnome Mad Scientist is equipped with a harpoon gun, prosthetic, mechanical leg, goggles, and ready to use potions. 20mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827862843476,"sku":"SH0101","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/ntgrrqoucno4gob6yree.png?v=1637594972"},{"product_id":"sh0102","title":"Gnome Monk, 20mm","description":"\u003cul\u003e\n\u003cli\u003eThis 20mm tall male Gnome Monk has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Brawler, Fighter, Rogue, Boxer, Street fighter . This Gnome Monk is equipped with a satchel, wrapped fists, jacket and pants with packed pipe.\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 20mm tall male Gnome Monk has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Brawler, Fighter, Rogue, Boxer, Street fighter . This Gnome Monk is equipped with a satchel, wrapped fists, jacket and pants with packed pipe. 20mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827863400532,"sku":"SH0102","price":11.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/fhgz5vavl5r3xtxpk4l8.png?v=1637594975"},{"product_id":"sh0105","title":"Gnome Pirate, 27mm","description":"\u003cul\u003e\n\u003cli\u003eThis 27mm tall female Gnome Pirate has a great amount of detail for dungeon-crawling, RPGs and table top war games.\u003c\/li\u003e\n\u003cli\u003eMiniature could be used as a Fighter, Buccaneer, Swashbuckler, Explorer, Rogue, Thief. This Gnome Pirate is equipped with a gun - Blunderbuss, sword, fancy hat, and a duster.\u003c\/li\u003e\n\u003cli\u003eIncluded with each mini is a slotted round plastic \"creator\" base. This base is not designed as a plug and play solution and requires some assembly and finishing (glue, putty, or other filler is recommended). Figure is made of 100% lead free pewter.\u003c\/li\u003e\n\u003cli\u003eFigures are unpainted. The pictures of the painted miniatures are for inspiration and are only examples.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis 27mm tall female Gnome Pirate has a great amount of detail for dungeon-crawling, RPGs and table top war games. Miniature could be used as a Fighter, Buccaneer, Swashbuckler, Explorer, Rogue, Thief. This Gnome Pirate is equipped with a gun - Blunderbuss, sword, fancy hat, and a duster. 20mm diameter slotted round plastic base included. Figure is made of 100% lead free pewter. \u003c\/p\u003e\u003cp\u003eMiniatures come unassembled and unpainted, some filing may be needed to clean up excess flashing, or sprue. The pictures of the painted miniatures are for inspiration and are only examples, these ship unpainted. Base tab on the miniature may be smaller than the slot in the provided base, some filing may be required. \u003cbr\u003e\u003cbr\u003ePlease note, some base tabs on the miniature may not fit perfectly to the base. To resolve this, you can simply bend the base tab into a shallow -V- so it touches each side of the base slot. Then drip a small amount of superglue onto each point that the tab contacts to the base. To cover the open areas of the base slot, you can glue in small pieces of construction paper over them. To give the base a more natural look, you can spread craft glue over the whole base and dip in in some dirt or sand from your yard for a gravel texture.\u003c\/p\u003e","brand":"Stonehaven Miniatures","offers":[{"title":"Default","offer_id":32827865727060,"sku":"SH0105","price":11.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1891\/1579\/products\/famxvzhva2qv5nmxq7aj.png?v=1637594980"}],"url":"https:\/\/www.stonehavenmini.com\/collections\/cloth.oembed?constraint=class_barbarian","provider":"Stonehaven Miniatures","version":"1.0","type":"link"}